Tutorial: Easy Peasy iPhone Pouch
I wanted to blog about a couple of things but they may have to remain secret. So I’ve broken my blog silence with a tutorial. I thought you might enjoy!
My original measurements were well out- any idea what I could use a mini pouch like this for? It’s 11cm tall so it could hold a couple of lipsticks…
2) Position the pocket on the front piece with right sides up and sew the sides of the pocket into position as close to the edge of the fabric as you dare and definitely less that 1/4″ seam allowance.
4) Cut a piece of button hole elastic so that it will go round your button when you eventually sew it on, plus 1/2″ extra. Fold it in half. Find the middle of the top of the back piece of the fabric, layer with wadding underneath and position the elastic in the middle, raw edges matching. Sew across less than 1/4″ from the top, reverse over and then sew again to secure in place. Layer the lining piece right sides together and sew along the top as with the front piece.
5) Press open. Then, with right sides together, match the lining pieces together and the outer pieces and sew round the edge. I started 1/3 from the corner on the lining and finished 1/3 way past to leave 1/3 in the middle of the lining to turn it the right way round. Clip the corners and turn right side out through the lining gap.
6) Fold the lining raw edges into itself and sew close to the edge. You can whipstitch the opening by hand if you prefer- I’m just lazy! Fold the lining inside and press. Sew on a button to the front. Choose one a good size for the elastic.