Tutorial: Dead easy earring display
I made this display to replace my tatty acrylic one at craft fairs and it was so easy I thought I’d share it with you. You can also use it to hang your own earrings on at home, and works for both dangles and stud types as long as they’re not too small.
YOU WILL NEED:
– 2 sturdy wood frames the same size. I chose 2 black A5 size ones, but the bigger they are the more earrings they will hold
– 7 mesh plastic canvas
-2 jewellery box hinges (4 if going for A4 size)
– Hammer and miniature screwdriver or pin vice
– Glue Gun
– It’s optional, but if you wanted to colour your mesh, you could do so by leaving in fabric dye overnight.
1) Take your frames and carefully remove the backing board and glass.
2) Cut the plastic canvas to size using the backing board as a guide. It will need to be the same size. and you will need to cut two.
3)Put the canvas into the frame and fold down the prongs on the back to secure it in place. Add a small blob of glue from your glue gun in each corner to stop it from sagging.
4) Once the glue is cool and hard, put the frames together so that the front on both are touching. Attach your brackets to the top and bottom of the long edge. Use your pin vice or tiny screwdriver to make the initial hole before bashing the pins that hold the brackets in with the hammer.
5) Admire your (not very) hard work! The way that the frames open means that they will stand on their own accord.